Sharp 168S - Press menu key then scroll to "Total Counter", Press "Enter" and the meter will appear.

Sharp 1430 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2014 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2020 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2022 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2025 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2027 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2030 - Copier must be in Ready To Copy Mode, press and hold down Scroll Display key meter reading will be displayed. 

Sharp 2035 - Press the clear key (orange key), the interrupt key and the clear key again.  Enter the Key Operator Code (or 00000).  Enter 29 and press the start key.  Press 1 to display the total copy count.

Sharp 2040 - Copies must be in Ready to Copy Mode, press and hold down Scroll Display key, meter reading will be displayed. 

Sharp 2050 - Copies must be in Ready to Copy Mode, press and hold down Scroll Display key, meter reading will be displayed. 

Sharp 2052 - Copies must be in Ready to Copy Mode, press and hold down Scroll Display key, meter reading will be displayed. 

Sharp 2060 - Copies must be in Ready to Copy Mode, press and hold down Scroll Display key, meter reading will be displayed. 

Sharp 2075 - Simultaneously press the Clear/Stop and Program keys.  Enter the Key Operator Code (or 00000).  Enter 29 and press the Start key twice to display the copy count.  To exit, press the Clear All key.

Sharp 2114 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2116 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2118 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2120 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2214 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2275 - Copier must be in Ready To Copy Mode, press and hold down Scroll Display key meter reading will be displayed.

Sharp 2314 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2414 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2514 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 2530 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 3062 - Copier must be in Ready To Copy Mode, press and hold down Scroll Display key meter reading will be displayed.

Sharp 5125 - Copier must be in Ready To Copy Mode, press and hold down Scroll Display key meter reading will be displayed.

Sharp 5132A - Copier must be in Ready To Copy Mode, press and hold down Scroll Display key meter reading will be displayed.

Sharp 7370 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp 7855 - Continuously hold down the 0/<> key (same key used to make 10 copies) on the numeric keypad until THREE sets of TWO digital numbers are displayed.  (include all zeros).  Read all six digits in consecutive order.

Sharp AR335 - On touch pad, touch "Custom settings", touch "key operator", enter the Key operator code (or 00000) on the key pad, press "Total Count" on the touch pad.  Meter will be displayed. 

Sharp AR336 - Lower left corner of the key pad, hold copy button down, reading appears on the screen.

Sharp AR405 - On touch pad, touch "Custom settings", touch "key operator", enter the Key operator code (or 00000) on the key pad, press "Total Count" on the touch pad.  Meter will be displayed.

Sharp AR505 - Hold down copy key

Sharp AR507 - Hold down copy key

Sharp C150A - Press copy button and print button - if that does not work go to custom settings / key op mode / total count

Sharp C160A - Press copy button and print button - if that does not work go to custom settings / key op mode / total count

Sharp C250A - Press copy button and print button - if that does not work go to custom settings / key op mode / total count

Sharp AR-157 - Hold down clear button

Sharp 3062 - copier must be in ready to copy mode, press and hold down scroll display key. Meter reading will be displayed.

Sharp 208D - Press menu key then scroll to "Total Counter", Press "Enter" meter will appear

Sharp 208S - Press menu key then scroll to "Total Counter", Press "Enter" meter will appear

Sharp C20A - press copy button and print button --- if that does not work go to custom settings / key op mode / total count